Hot Rolled Steel Plates Mn13 High Manganese Hadfield Wear Resistant Steel Plate

• After-sales Service: 1 Year
• Warranty: 1 Year
• Type: Steel Plate
• Standard: ASTM, AISI, GB, JIS, DIN, BS
• Certification: ISO
• Surface Treatment: Blackface
• Model NO.: MN13
• Technique: Hot Rolled
• Application: Container Plate, Flange Plate
• Special Use: High-strength Steel Plate, Wear Resistant Steel
• Stock: Stock
• Hardness: HRC58-65
• Sample: Freely
• Price Term: Fob CIF CFR EXW Fca
• Payment Term: 30% Advance+70% Balance
• Delivery Time: 7-15 Days
• Initial Hardness: Hb200-250
• Hardfaced: 500-600hb
• Transport Package: Steel Belt
• Specification: (3-150)mm*1500mm
• Trademark: Kai
• Origin: China
• Production Capacity: 300000 Ton/Month

Product Description

 

Product Description

 Hot Rolled Wear Resistant High Manganese Mn13 Steel plate

High Manganese Steel Plate (Mn13/X120Mn12)steel plates sheets have wonderful abrasion resistance of high impact abrasion and big stress abrasion, when using it will not appear crack. It also has the excellence of easy for cutting ,welding ,curving and other mechanical properties for process.

Product Parameters

Mn13 Chemical Composition
C	Si	Mn	P	S
0.90-1.20	0.30-0.80	11.00-14.00	≤0.035	≤0.030

Mechanical behavior
tensile strength	Elongation	Impact performance 20ºC	Initial hardness value (HB)	Hardness value after hardening (HB)	Cold bend 180°
≥800MPa	≥40%	ak≥90(J)	200-250	>300	qualified

 

Detailed Photos

High Manganese Steel Plate (Mn13/X120Mn12) is a non-attractive and work solidifying kind of steel which flourishes with serious wear conditions. The best thing for the plate is: the more effect and pounding it gets, the harder its surface becomes. 

High Manganese Steel Plate (Mn13/X120Mn12) rolled plate can reduce the cost of using for quick-wear part of low equipment and save the overhaul fee of equipment, so it improves the competition.

 

 

Application

MN13 STEEL PLATE Widely used in building, industry, machinery and etc.
Such as wear-out parts of impact resistance ,such as scaleboard of shot-blasting machine, scaleboard of ball crusher; ball grinder,bucket lip of grab,screw die of crusher,hoppers, truck Bed Bodies, scrapers, conveyor Parts, baffle plates, safe deposit box and so on .

Also used to make simply structure ,the forging which request wear-resistance of low impact,such as scaleboard , pinion rack,the wall of crashing, sleeve and etc., 

 

 

Our Advantages

1. For cutting Mn13 high manganese wear-resistant steel plate, plasma cutting is recommended.
Plasma cutting is divided into underwater plasma and air plasma cutting. When using underwater plasma cutting, the plasma gas can produce thousands of degrees of high temperature, the high manganese steel plate is melted quickly at the cut, and the water is blocked to avoid oxidation, and the water cools the steel plate in time to prevent the precipitation of carbides and cut the steel plate. The surface is smooth and flat, there is no heat-affected zone, and the cutting quality is the best. It is the first choice for cutting high manganese steel. Air plasma cutting can also be used.

2. Mn13 high manganese wear-resistant steel plate can also be cut by traditional flame.
When using flame cutting, it is recommended to use a cutting trolley. According to the thickness of the steel plate, use different specifications of the gun head, and adjust the ratio of gas and oxygen appropriately (preferably a neutral flame), and it is best to start cutting after all adjustments. Prevent the cross-section gap caused by the midway flameout and arc ignition, which affects the cutting quality.

3.Welding of Mn13 high manganese wear-resistant steel plate
Manual arc welding can be used for welding high manganese wear-resistant steel plates. Before welding, the welding seam should be polished, and the groove and edge of the workpiece should be thoroughly cleaned to remove rust and oil stains. At the same time, the electrode should be dried; when welding, a small diameter electrode (usually 3mm-3.5mm), small current, high voltage, Multi-layer welding, multi-pass, fast welding; if DC welding is used, the electrode is connected to the positive electrode; after each layer is welded, the weld must be hammered to improve its thermal crack resistance. You can also use running water to cool down quickly.

 

Certifications

Our company has established good relations with other domestic steel mills, like wusteel, baosteel, ansteel, and also have cooperation with foreign steel mill, like Handox, Raex, Jfe. We have our own quality management systems : ISO9001 , ISO14000 , OHSAS18001 standards, strictly control purchases, produce, sales, warehouse and transport processes.

 

 

Packaging & Shipping

Packing Details : Bundle with steel strip
Delivery Details : Use trays to facilitate loading and unloading Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

20 Feet Container: Length 5930mm *Width 2350mm*High 2154mm
Loading weight: 26Ton

40 Feet Container: Length 12062mm*Width:2350mm*High 2284mm
Loading weight: 26Ton

Company Profile

Shandong Kai Steel IMP. & EXP. Co.,Ltd.

located in Shandong province. In order to meet customer request of product variety,we established long term friendly cooperation with famous domestic mill plants. With good reputation in Europe, Southeast Asia, Middle East, South America and Africa,our annual export volume twenty-five million dollars,about forty percentage of total sales,especially our Wear Resistant Steel Plate, Weathering Steel Plate, High Strength Carbon Steel Plate are popular with Southeast Asia, Middle East customer .